 |
Programmable
Indicators |
 |
 |
GSE programmable
indicators-
Model 550
Standard Features
- Weighing Units
Selectable, 1-4 units can be viewed by pressing Units key, 2 custom units can be defined:
Ton, Troy oz, etc.
- Basic Truck In/Out Routine
ID and Weight Storage, macros can be used for more sophisticated truck weighing
applications.
- ID Data Registers
Six (6) Alpha-Numeric, 49 character
Thirty (30) variable use numeric data registers
Four (4) variable use integer registers
- Time/Date Clock
Selectable formats, battery backup optional
- Diagnostic Parameters
Assist with setup and troubleshooting
- Remote Keys - 6
Momentary contact closure invokes macros, distance 500' (150m) with low-capacitance cable
(<35pf) and low voltage switch
- Auto Display On/Off
Display can be configured to power down automatically
Power up by applying weight or press any key
For more information, or special pricing, contact us at
sales@measurespec.com |
 |
|
 |
|
Applications include:
Multi-Ingredient Batching, Loss-in-weight Applications, Formula Storage and Retrieval,
Automated weighing systems, Truck Weighing Applications, Parts Counting/Inventory Control.
|
|
|
Dimensions are in inches and (mm). |
| A |
B |
C |
D |
E - mounting holes |
F |
G |
| 9.38 (238.3) |
8.38 (212.8) |
2.20 (55.9) |
8.00 (203.2) |
.28 (7.1) dia |
2.20 (55.9) |
9.00 (228.6) |
|
|
PERFORMANCE |
|
|
|
Selectable
100,000 displayed
+/- 500,000 internal |
|
|
- Display Update
- A/D Conversion
|
Selectable 0.05 - 20 seconds
20 conv./sec., response time
to FS selectable, 0.12 - 11 sec. |
|
|
- Non-linearity
- Zero Track
- Zero Range
- Calibration
- Weigh Increments
- Operating Temp.
- Warranty
|
0.005% of FS (input dependent)
0.05-20.0 displayed
grad aperture
Selectable from 0.01-100% of FS
Selectable,
5 multi-point calibration
.00001 through 500
-10 to 40º C
1 year |
|
|
|
|
|
|
Load Cell Input |
|
|
- Connections
- Power
- Signal Range
- Excitation
- Current
|
4 lead or 6 lead with sense
10 (ten) 350 ohm cells
0.1 to 4.9 mV/V at FS
10 VDC, short circuit protected
290 mA maximum |
|
|
|
|
|
|
Electrical |
|
|
- Power Input
- Fuse
- Setpoints
|
120 VAC, 50/60 Hz or 10-28 VDC
220 VAC 50/60 Hz or 10-28 VDC
0.5 amp Slo - Blo
2 logic levels, open drain |
|
|
|
|
|
|
Communications |
|
|
- Port 1 - Comm
- Port 2 - Print
- Port 3 - Auxiliary
- Data String
- Baud Rate
- Protocol
|
Serial RS232 bi-directional
Serial RS232 uni-directional
or 20mA current loop
active or passive
TTL level RS232 serial input,
bar code scanner, keyboard
Configured in custom transmit tables
150-19200, Selectable
Selectable |
|
|
|
|
|
|
Approvals |
|
|
|
|
|
