Mantracourt Strain Gauge
Transducer Amplifier
Models SGA/A & SGA/D
The SGA is a strain gauge transducer amplifier which provides a wide range of signal conditioning for strain gauges, load cells, pressure and torque transducers.
Offered in two versions, the SGA/A for 110/230V AC or 18-24V DC operation and the
SGA/D which is DC powered only.
Transducer sensitivities of between 0.1mV/V and 30mV/V are accommodated by a combination of DIL switch settings and a fine trim potentiometer.
Similar arrangements are provided for any "zero" errors in the transducers and can be used to offset the reading by up to +/- 79% of full scale.
A wide frequency response is offered; typically DC to 5KHz. There is an on-board low pass filter which can be switched in to reduce high frequency fluctuations or induced electrical noise, to give stable readings under adverse conditions.
A wide range of output options for current and uni-polar or bi-polar voltage can be configured by DIL switch settings.
Both the AC and DC versions are based on a common board and are mounted in a light
gray ABS case sealed to IP65 standard.
For more information, download pdf
specifications file.
Or download reference manual in pdf format.
For special pricing, contact us at
sales@measurespec.com
To Order : Call 1-800-899-9988 8am-5:30pm M-F
|
